The McLean Company » w120f http://themcleancompany.com Sat, 24 Jul 2010 20:08:20 +0000 en hourly 1 http://wordpress.org/?v=3.0 Chagrin Valley Paving Wirtgen W120F http://themcleancompany.com/chagrin-valley-paving-wirtgen-w120f/ http://themcleancompany.com/chagrin-valley-paving-wirtgen-w120f/#comments Mon, 05 Apr 2010 20:05:16 +0000 McLean http://themcleancompany.com/?p=71 Paul Phillips owner of Chagrin Valley Paving proudly stands by his new 2010 Wirtgen Milling machine model W120F, This machine is shown cutting a controlled depth of 1.25” deep on a street paving project utilizing the new Wirtgen dual grade and slope system Level Pro. The second section of the project shows roadway full removal of 9” deep. Paul decided on the Wirtgen because of its tremendous production capability and yet is sized right for mobilization with the folding conveyor feature and right hand rear corner location of the cutter head. Another feature of Chagrin Valley Paving’s W120F is the optional Flexible Cutter System (FCS) which will allow, if purchased (optional drums) to go to widths of 2 ft., 3 ft., and the standard 4 ft wide cutter head. The machine has the ability to cut over 12-13” deep in one pass. Paul with the purchase of the W120 became a 3 amigo customer owning Vogele, Hamm and Wirtgen Products purchased from The McLean Company. For more information on Chagrin Valley Paving see the attached link. For more information on the Wirtgen W120F FCS see the attached link.

www.wirtgenamerica.com

http://www.chagrinvalleypaving.com

Chargrin W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

Chagrin Wirtgen W120F

]]> http://themcleancompany.com/chagrin-valley-paving-wirtgen-w120f/feed/ 0 Wirtgen Group W120F http://themcleancompany.com/wirtgen-group-w120f/ http://themcleancompany.com/wirtgen-group-w120f/#comments Wed, 01 Apr 2009 19:56:37 +0000 McLean http://themcleancompany.com/?p=64

Wirtgen America Inc. will exhibit the new W 120 F at Conexpo-Con/Agg 2008 in Las Vegas in March.

Part of a new line of midsized mills, the W 120 F is a high-performance cold milling machine with a drum width of 48 inches (120 cm), ideal for removing complete asphalt courses with a milling depth of 0 to 12.6 inches (0 to 320 mm). Its engine output is 304 hp, and it replaces the W 1200 F/T in the product line.

The W 120 F has a hydraulic swinging track for flush cutting, and features front-end loading of reclaimed asphalt pavement (RAP) via a two-part conveyor system. The machine is available in a tracked version but can be ordered in a wheeled version.

The optional Flexible Cutter System (FCS) permits the use of different milling drums with working widths of up to 48 in. and a variety of line spacings. And the W 120 F will be equipped with the new Wirtgen Level Pro® leveling system.

Wirtgen also will exhibit the new WR 2000 XL recycler/stabilizer, with a 94-in. cutting drum and 425 hp engine.

Wirtgen W120F

]]> http://themcleancompany.com/wirtgen-group-w120f/feed/ 0